Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
ThompsonPlumbing (GA)
I'm working on a laundry mat. I have a 300 gallon holding tank for water. The existing ballcock is 3/4. Any idea where I can purchase a 1 1/2" ball cock? Btw Im not talking about a fill valve for a toilet. Thanks
|
Post Reply
|
Author:
North Carolina Plumber (NC)
Seems like I got one from a farm supply once. It was designed to keep watering troughs full.
|
Post Reply
|
Author:
m & m (MD)
I have installed the tank float sold thru our sponsor. It is a 1" valve and if you reduce to 1" immediately before the float you will be fine. My application was for a 500 gallon tank and it works great- replaced a ballcock style valve.
|
Post Reply
|
Author:
ThompsonPlumbing (GA)
The booster pump is emptying the 300 gallon tank too quickly. The waterline is 1 1/2" then drops to 3/4 because the ball cock is 3/4. No room for a larger tank
|
Post Reply
|
Author:
ThompsonPlumbing (GA)
Good idea. Thanks
Edited 1 times.
|
Post Reply
|
Author:
hj (AZ)
You need a "throttle valve" on the outlet of the pump, not a smaller float valve.
|
Post Reply
|
Author:
m & m (MD)
You could split the 1-1/2" supply inside the tank and install two or more valves. Is it the washers that are pulling so much water that quickly?
|
Post Reply
|
Author:
hj (AZ)
Graingers has several different models of float valves.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: