Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
erineliz0406 (FL)
I tried to pull the shower handle off and accidentally broke off a piece of the stem. Some of it is still in the old handle and some of it is still attached to the wall. How can this be repaired? Do I HAVE to call a plumber?
[@#$%&[s200.photobucket.com]][/URL]
Edited 1 times.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
You won't have to if you can remove the stem from the valve body, and replace it and the handle. Can you show a picture of what you're working with ?
|
Post Reply
|
Author:
erineliz0406 (FL)
I just added a photo. What do you think? I noticed the mold growing behind the handle and tried to remove it to clean. I used very little force, but this is what happened. =(
|
Post Reply
|
Author:
srloren (CA)
Cheap plastic stems...shame.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
You'll need to turn the water off to the house, unscrew the bonnet nut and then pull the stem free from the valve body. Take the stem and handle to a plumbing supply store and see if you can find a match.
|
Post Reply
|
Author:
erineliz0406 (FL)
I already have a new handle, so I will just need a new stem. So I won't need any special tools? Any idea how expensive a new stem will be? Hopefully cheap!
Edited 2 times.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
$12, give or take.
Edited 2 times.
|
Post Reply
|
Author:
erineliz0406 (FL)
Great! Thank you! Can you recommend any videos that demonstrate the best way to do this? I'm not handy at all!
Edited 1 times.
|
Post Reply
|
Author:
hj (AZ)
If you have the correct handle, then you MUST also know who made the faucet, which should make getting the new stem somewhat simple. Normally, the new stem will have directions.
|
Post Reply
|
Author:
ravi102769 (VA)
Please don't tell us that you just went to Home Depot and bought a handle that looked similar?
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|