Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
SteviiGee3221 (DC)
I was testing a garden hose for leaks at my washroom slop sink. When I went to unscrew the hose the adapter came off with it and is still screwed tightly into the hose end.
What tool or method is best for backing this out?????
I have tried....
1. Re-attaching and tighten as much as possible.
2. (#1 above) with the addition of several layers of thread tape, trying to make the attachment to the faucet
tighter than the attachment to the hose.
Obviously, this has not worked. I thought to try to use some kind of bonder (glue, etc) but as the faucet and adapter are metal and hose end is plastic I'n not sure what to use or if it is even advisable. And still yet how to keep adhesive on the correct parts with out having it squeeze out and create a permanent bond witht the hose.
ANY help will be appreciated, I would truly love to save the hose if possible.
Thanks
|
Post Reply
|
Author:
hj (AZ)
How about a picture so we know what kind of adapter you are working with?
|
Post Reply
|
Author:
KCRoto (MO)
Use 2 pairs of pliers. One pair to hold the adapter, one to unscrew the hose.
|
Post Reply
|
Author:
hj (AZ)
The adapter may be flush with the hose, which is why we need a picture of it.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: