Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
chitchcock (MA)
In a recent move, the fitting on the back of the clothes washer was broken and had to be replaced. After the drain hose (going to the drainage standpipe) was reconnected to the machine's fitting and clamped tight, I had a small amount of leakage from that connection point (i.e., the fitting to the drain hose); couldn't get it tight enough to stop the leakage. Is there some sealant to put on the fitting and/or inside the hose which makes the connection more complete (kind of like the way plumbers tape makes the seal on the threads of metal plumbing connections)?
|
Post Reply
|
Author:
hj (AZ)
If you use the right fitting, the right hose, AND the right clamp, you do NOT need any "sealant". Therefore, one of the three items is not the right one.
|
Post Reply
|
Author:
packy (MA)
try doubling up on the hose clamps. install them so they are opposite eachother.
|
Post Reply
|
Author:
chitchcock (MA)
The two clamps worked (plus a little heating of the hose with a hair dryer). Thanks!
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|