Welcome to Plbg.com
Thank you to all the plumbing professionals who offer their advice and expertise

Over 705,000 strictly plumbing related posts

Plbg.com (aka: PlumbingForum.com) where plumbing help, advice, education, information, and plumbing related suggestions are provided FREE by some of the most experienced plumbing contractors and plumbers anywhere who all wish to "give back" to society. Since 1996 we have been completely free of popup advertising or any other invasive ads and have been known to be the best online STRICTLY PLUMBING advice and help site. You've come to the right place IF you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues. Please refrain from asking or discussing legal questions, or pricing, or where to find and/or purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. We absolutely do not sell your personal information. We are made possible by:  

Post New
Search
Log In
How to Show Images
Newest Subjects
 Can a washer standpipe connect to this old drain stub? (1987 Vancouver building)
Author: Fuzzypink (Canada)

Hi everyone, looking for some experienced eyes on this one. This is in a 1987 multi-unit building in Vancouver, BC. A small room that was used for storage has a drain stub poking out of the wall near the floor.
At some point a washing machine drain hose was connected to that stub with a rubber coupling, looped and zip-tied to shelving track. Over time there was a long, slow leak with heavy staining on the floor and baseboard.
When the wall was opened up, we found the vertical drain stack with a side branch ending in a threaded fitting. No U-bend trap shape is visible anywhere in the exposed work. The restoration has since installed a proper laundry outlet box with a standpipe.
My questions:
1.
Could a code-compliant washer standpipe ever have been connected to that stub as it was?
2.
Is there a trap visible in the exposed work?
3.
What size drain does a clothes washer require under the Vancouver Building By-law Book II (Plumbing Systems)?
4.
If this branch had been left open and untrapped, would you expect a sewer gas smell in the room?
5.
Would this type of drain be left open or would it be capped if it is not in use?
6.
Picture 7 shows the original stacks from our 1987 building, can HE machines be connected to this stand pipe without modifications?

[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]

Thank you everyone in advance for kindness,time, and help.

Kim

Post Reply

 Re: Can a washer standpipe connect to this old drain stub? (1987 Vancouver building)
Author: steve (CA)

If you were in the US and there are fixtures draining into that vertical pipe from above storeys, then that standpipe would not be allowed without adding a vent between the trap and in-wall pipe. Canada does allow wet venting multiple storeys into a single vertical drain pipe, but there are some limitations. The minimum size for the standpipe and trap is 2" in the US and Canada(is the new piping 1 1/2 or 2"?). Pic 6 doesn't look like there's a trap in the new piping. The unused wall stubout should have been capped to prevent sewer gas from entering structure. You shouldn't have a problem with HE machine.



Edited 1 times.

Post Reply

 Re: Can a washer standpipe connect to this old drain stub? (1987 Vancouver building)
Author: Fuzzypink (Canada)

Thank you Steve, I appreciate your feedback. Two questions if I may:
1.
If a plumber came in and found this stub as it was, would they have been able to simply attach a P-trap and standpipe to it and call it a proper washer drain — or would the drain have needed to be rebuilt first?

In your professional opinion by looking at the pictures what is your observation or guess who did this installation?

[@#$%&[postimg.cc]][/url]
[@#$%&[postimg.cc]][/url]

2.This is a picture of what has been rebuilt and hopefully done correctly and brought up to code.

[@#$%&[postimg.cc]][/url]

3.A separate question about this building’s 1987 plumbing: another unit here has the complete original assembly — a standpipe and P-trap on the old drain. What size drain would a modern stackable HE washer and dryer need, and is that 1987 system big enough for a modern machine’s pump discharge?

[@#$%&[postimg.cc]][/url]

I honestly need to measure the standing pipe in the picture, to tell you what size it is. I know we have a lot of members using machines that are currently connected to this system.

Thank you all for your kindness and help.
Kim

Post Reply

 Re: Can a washer standpipe connect to this old drain stub? (1987 Vancouver building)
Author: steve (CA)

Picture 1 could be turned into picture 4, if the new standpipe and trap are 2", and if the vertical in-wall pipe is receiving waste from above storeys, there's a limit of 4 fixture units per storey that can drain into that vertical pipe. If more than 4 fixture units per floor drains into the vertical pipe, the vertical pipe can't be a wet vent for the new washer drain and a separate vent would be required. Picture 2 is completely illegal. The new trap and standpipe in picture 4 appear to be 2", based on the diameter of the yellow plunger handle, which is usually about 7/8". Picture 3 would be legal, if the new standpipe, trap, trap arm and through-floor pipe is a minimum 2". New vent can be 1 1/2".

Post Reply

 Re: Can a washer standpipe connect to this old drain stub? (1987 Vancouver building)
Author: ArthurPeabody (NM)

UPC 804.1 'Standpipe Receptors' reads, 'No standpipe receptor for a clothes washer shall extend more than 30 inches (762 mm), or not less than 18 inches (457 mm) above its trap. No trap for a clothes washer standpipe receptor shall be installed below the floor, but shall be roughed in not less than 6 inches (152 mm) and not more than 18 inches (457 mm) above the floor.' I don't know the rules in Canada, but that's good advice anywhere.

Post Reply

 Re: Can a washer standpipe connect to this old drain stub? (1987 Vancouver building)
Author: steve (CA)

The only things I'm seeing in the Canadian code is a 24" minimum length of the standpipe and the top of the standpipe shall be above the flood level of the washing machine.

Post Reply

 clap
Author: Fuzzypink (Canada)

Thank you for your time and for helping me find the answers.

Kim



Edited 1 times.

Post Reply

 applause
Author: Fuzzypink (Canada)

Thank you for your time and your detailed answers.
Kim



Edited 1 times.

Post Reply





Please note:
  • Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
  • Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
  • Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
  • Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.

Search for plumbing parts on our sponsor's site:




Special thanks to our sponsor:
PlumbingSupply.com


Copyright© 2025 Plbg.com. All Rights Reserved.