![Welcome to Plbg.com](/images/plbg-forum-logo.png)
![Thank you to all the plumbing professionals who offer their advice and expertise](/images/plbg-thankyou-banner2.png)
Over 700,000 strictly plumbing related posts
Welcome to Plbg.com (also known as PlumbingForum.com) where plumbing advice, education, information, help and suggestions are provided by some of the most experienced plumbers and plumbing contractors anywhere who all wish to "give back" to society. Since 1996 we have been free without popup or other invasive ads and known to be the best online STRICTLY PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to find and/or purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't track you. We absolutely do not sell your personal information. We are made possible by:
Author:
Swanee (FL)
I have a dedicated shower,(no bathtub) with very little water flow to the shower head. New Cartridge and springs/seats. Great water flow from the valve body when the cartridge is removed (Delta 1700 series cartridge and valve body) I have removed the lower pipe cap from the valve body (that would have gone to a tub) and snaked a line through to the shower head, no blockage or sediment. What am I missing here?? Any suggestions would be greatly appreciated. Professional plumber could not offer any suggestions.
|
Post Reply
|
Author:
bernabeu (SC)
? clogged showerhead ?
? low water pressure and water saving showerhead ?
? have you tried simply removing the showerhead and seeing the flow from the 'arm' ?
|
Post Reply
|
Author:
Swanee (FL)
Shower head was removed to run snake to valve body. Water pressure excellent
|
Post Reply
|
Author:
bernabeu (SC)
then soak the shower head in vinegar for 48 hours, it 'may' be 'calcified'
|
Post Reply
|
Author:
Swanee (FL)
Thanks , shower head is off, very low water flow, incoming pressure is excellent
|
Post Reply
|
Author:
bernabeu (SC)
rig a garden hose to the shower arm
'back flush' the shower valve body with the cartridge in place and the lower cap off
you will need 'stops' on the water supply to the valve, install them now if not present
Edited 1 times.
|
Post Reply
|
Author:
steve (CA)
Was the black plastic screen removed before installing the cartridge?
|
Post Reply
|
Author:
bernabeu (SC)
steve,
one day ask me about my '? did you try tightening the bulb ? electrical adventure
![tongue sticking out smiley tongue sticking out smiley](https://www.plbg.com/forum/mods/smileys/images/tounge.gif)
|
Post Reply
|
Author:
Swanee (FL)
would this screen be located in the valve body? Pretty sure I would have noticed it when I replaced the seats and springs.
|
Post Reply
|
Author:
Swanee (FL)
Bernbeau
Should the cartridge be in the on or off position when I backflush
|
Post Reply
|
Author:
bernabeu (SC)
OFF
at first
THEN (if problem persists) ON
|
Post Reply
|
Author:
steve (CA)
There should be three holes in the back of the valve body, hot cold and the middle hole has a plastic screen in it when it came from the factory. This screen is supposed to be removed before installing the cartridge.
|
Post Reply
|
Author:
Swanee (FL)
BERNBEU
THANK YOU FOR YOUR HELP. WHEN I REMOVED THE LOWER CAP I TOOK A WIRE AND OPENED THE MACHINED HOLES GOING UP TO THE SHOWER HEAD. THEN I REVERSE FLUSHED THE SHOWER HEAD WITH A GARDEN HOSE AND NOW HAVE EXCELLENT WATER FLOW.
APPRECIATE YOUR INPUT !!
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
![PlumbingSupply.com](https://www.plumbingsupply.com/images/plumbingsupply.png)
|