![Welcome to Plbg.com](/images/plbg-forum-logo.png)
![Thank you to all the plumbing professionals who offer their advice and expertise](/images/plbg-thankyou-banner2.png)
Over 700,000 strictly plumbing related posts
Welcome to Plbg.com (also known as PlumbingForum.com) where plumbing advice, education, information, help and suggestions are provided by some of the most experienced plumbers and plumbing contractors anywhere who all wish to "give back" to society. Since 1996 we have been free without popup or other invasive ads and known to be the best online STRICTLY PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to find and/or purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't track you. We absolutely do not sell your personal information. We are made possible by:
Author:
Brian4321 (MD)
My friend was out of town for 6+ months. Cleaning lady was supposed to flush all toilets, but missed one. As a result, the water in the tank dried up and the rubber seal and sponge gasket are dried and hard. I've removed the fill valve and both sets of bolts, but the tank won't lift up. I've tried rocking the tank, but still cannot lift it up. The seal and gasket appear to have dried/expanded to tightly hold the flash valve in place. Any suggestions on how to resolve this issue? Use a saw to cut the flush valve where it goes through the hole to the base? Thanks in advance.
|
Post Reply
|
Author:
bsipps (PA)
If your positive you have removed all the tank to bowl bolts the tank should come off by wobbling and lifting I would not suggest cutting the flush valve
Edited 1 times.
|
Post Reply
|
Author:
bernabeu (SC)
There 'may' be THREE 'sets' of bolts.
|
Post Reply
|
Author:
packy (MA)
it is possible that the installer had put some sort of caulking on the rubber gasket to help it seal. (absolutely not the correct thing to do)
so it could be kinda "glued" together.
try very gently tapping some wood shingles between the tank and bowl. "GENTLY"
|
Post Reply
|
Author:
Brian4321 (MD)
Thanks, guys, for the feedback. Much appreciated.
FYI, there were only two sets of bolts holding the tank to the bowl. Not wanting to lift too hard and break the ceramic, I decided to cut a small piece of the tube that goes from the tank to the bowl. Once that piece was out, I was able to squeeze the tube and felt something give underneath. Only then did the tank easily lift off the bowl. Had to take the tank outside and hose it down to get rid of all the small bits of plastic in the tank. There was no caulk/glue holding the sponge gasket to the bowl.
Now that I replaced all the innards, the toilet is working fine again.
Again, many thanks for the feedback!
Edited 1 times.
|
Post Reply
|
Author:
george 7941 (Canada)
This is odd, the tank being stuck on to the bowl. I have worked on hundreds of old toilets and have never had much difficulty lifting the tank off.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
![PlumbingSupply.com](https://www.plumbingsupply.com/images/plumbingsupply.png)
|