Over 700,000 strictly plumbing related posts
Welcome to Plbg.com (also known as PlumbingForum.com) where plumbing advice, education, information, help and suggestions are provided by some of the most experienced plumbers and plumbing contractors anywhere who all wish to "give back" to society. Since 1996 we have been free without popup or other invasive ads and known to be the best online STRICTLY PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to find and/or purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't track you. We absolutely do not sell your personal information. We are made possible by:
Author:
Hauntedfaucet (OK)
On two separate occurrences, an exterior frost-proof wall faucet has mysteriously turned itself on full blast. Most recently this occurred at 2:30am on Christmas morning. We do not have pranksters in our neighborhood nor children. The previous incident was in the middle of the day in broad daylight about 10 years ago. A garden hose was NOT attached in either occurrence. We discovered each incident based upon the loud noise of water rushing. The solution was to turn the wagon wheel handle from completely ON back to completely OFF where we had left it. Perhaps unrelated, but similar......a bathtub faucet did the very same thing in the middle of the night very close in time to the first outside faucet episode. With the bathtub, we could not stop the water with the faucet handle. It would just spin. We turned off the main water to the house, went back to bed, and the next morning, the handle functioned properly turning water on and off as expected. After that incident we began to turn off water to our home when we left town. What could be causing our phantom faucet fiasco?
|
Post Reply
|
Author:
bernabeu (SC)
High water pressure ??!!
|
Post Reply
|
Author:
packy (MA)
wild guess..
alot of freezeproof faucets have a spring inside the end of the stem.
possibly high pressure forced that spring to allow water to come by the washer on the end ?
some shower valves also have springs. maybe the same scenario?
|
Post Reply
|
Author:
hj (AZ)
Some hose bibbs have a very "coarse", i.e., quick opening, thread and if the packing get loose pressure can force the stem to open the faucet.
|
Post Reply
|
Author:
Hauntedfaucet (OK)
Most of our town is currently complaining about low water pressure. And not sure how even HIGH pressure would cause the valve to unscrew completely.
|
Post Reply
|
Author:
Hauntedfaucet (OK)
Not sure if this one has "course" threads but it takes 8-10 cranks to get it closed back after this happened.
|
Post Reply
|
Author:
bernabeu (SC)
The faucet has stripped or 'loose' threads on either the body, the spindle, or both.
Replace it and be done with the issue.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|