Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
syakoban (NJ)
Hi,
Building out a new bathroom with copper supplies. The shower control has threaded connectors on the hot and cold. After having mold from water leaks in the wall in a previous bathroom, we're paranoid about leaks in this one in the future. What is the best way to be sure the threaded connections don't leak over time? I bought some Hercules Block Gasket and Pipe Thread Sealant, but I'm seeing mixed reviews and just don't know if I can trust it.
Thoughts? Anything better?
Thanks guys!
Edited 1 times.
|
Post Reply
|
Author:
packy (MA)
aren't the threaded ends also made for copper tubing to fit inside and solder?
if you have to screw fittings, the best way is 4-5 wraps teflon tape with blue monster pipe dope ontop.
|
Post Reply
|
Author:
bernabeu (SC)
The best dope imo is permatex pipe joint compoud - formerly named permatex #12.
Very very VERY messy if handled carelessly.
BUT
as Packy stated: you should be able to solder DIRECTLY to the valve body
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
hj (AZ)
If the connections do not have copper sweat internally then I solder the adapters into the threads.
|
Post Reply
|
Author:
syakoban (NJ)
Thanks guys.
I believe it is designed to alternatively solder to the brass body, but the instructions make a big deal about overheating the valve so I was hesitant.
Does it make sense to disassemble the guts, solder, and then reassemble or will I get myself into more trouble?
|
Post Reply
|
Author:
steve (CA)
Yes, disassemble before soldering.
|
Post Reply
|
Author:
bernabeu (SC)
also, you may consider 'cheating' and using 50/50 solder JUST for the actual body joints
unless you regularly drink the bath water
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
packy (MA)
thats not cheating.
code says no-lead brass is not required on a tub/shower valve.
|
Post Reply
|
Author:
hj (AZ)
In 65 years, I never took the valves apart first.
|
Post Reply
|
Author:
bernabeu (SC)
packy,
i bow to your infinite pit of knowledge
personally, i use 95/5 for almost everything
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
hj (AZ)
there are some times when the higher temperature required is not desirable.
|
Post Reply
|
Author:
bernabeu (SC)
personally, i use 95/5 for almost everything
agree
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
bernabeu (SC)
95-5 has a liquidus of 400 + or -
silva brite is 600 +
silva brite has a much 'wider' pasty range making it 'appear' easier
i will stick with 95-5 or 50-50
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|