Welcome to Plbg.com
Thank you to all the plumbing professionals who offer their advice and expertise

Over 698,000 strictly plumbing related posts

Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:  

Post New
Search
Log In
How to Show Images
Newest Subjects
 tub faucet identification
Author: shaymanrn (OH)

I have a leaky tub faucet, single handle that pulls on and turns right and left for temperature control. I have taken the handle off and pulled the pin on the inside but I can't get the center or anything else to come out to attempt to replace the cartridge or washers. I don't know the brand or anything about this. Any help would be appreciated!
[postimg.cc]



Edited 2 times.

Post Reply

 Re: tub faucet identification
Author: steve (CA)

It's a Moen faucet. Google "Moen 1225 removal" and watch a couple videos. You will need to rotate the cartridge body, to loosen the o-rings between the cartridge body and the faucet body. Do not just try and yank out by the stem. Once the cartridge body rotates, it should pull out with the stem. Make sure the inside bore of the faucet body is clean and use some plumber's grease on the new cartridge seals. New cartridges often come with a small plastic tool to help rotate the cartridge body.

Post Reply

 Re: tub faucet identification
Author: Curly (CA)

Steve,

I don't think it is the Moen 1222 positemp cartridge.

It looks more like Moen 1225 cartridge.

Post Reply

 Re: tub faucet identification
Author: hj (AZ)

The first thing to do is remove the "U" shaped clip from the valve. It is a 1200/1225 core.

Post Reply

 Thank you thank you thank you clap
Author: shaymanrn (OH)

I can't begin to thank you enough!! You guys are the greatest!



Edited 1 times.

Post Reply





Please note:
  • Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
  • Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
  • Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
  • Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.

Search for plumbing parts on our sponsor's site:




Special thanks to our sponsor:
PlumbingSupply.com


Copyright© 2024 Plbg.com. All Rights Reserved.