Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
donmc (TN)
I just started using PEX, so I'm quite ignorant. I'm using the stainless steel pinch type clamps on 1/2" PEX B. I'm having problems keeping the clamps from moving on the pipe while I try to use the clamp tool to cinch them.
I have two brands of pinch clamps. One type fits fairly snug, and isn't as much problem, but the other type fits very loose, and is very difficult to keep in place on horizontal runs, and impossible on vertical runs. These clamps work very well if I can get them cinched in the right place though. No leaks at all.
I was thinking maybe I could use a piece of electrical tape to hold them in place until I can cinch them. I want to ask if anyone has better ideas.
Thanks for any help.
|
Post Reply
|
Author:
bernabeu (SC)
masking tape works well and does not need to be removed afterwards
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
donmc (TN)
Many thanks, bernabeu. I'll get some masking tape and give it a try. What I have on hand is about 30 yrs old, dried out and stuck together. Maybe it will help. It's tuff standing on a ladder trying to crimp these buggers with only two arms
So far, I like PEX much better than the old CPVC stuff, but it's steep learning curve for us old fossils.
Edited 1 times.
|
Post Reply
|
Author:
bernabeu (SC)
blue 'painters tape' is easy to 'work'
ps. imo CPVC = GARBAGE unless used exposed as it 'hardens' and 'brittalizes' over time
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
ArthurPeabody (NM)
I use painter's tape. I can't imagine using nothing on vertical connections. Since I started working out regularly I have more strength to cinch them.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|