Welcome to Plbg.com
Thank you to all the plumbing professionals who offer their advice and expertise

Over 698,000 strictly plumbing related posts

Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:  

Post New
Search
Log In
How to Show Images
Newest Subjects
 How much weight can you put on Schedule 40 2" pipe
Author: blues511 (TX)

There is a 2" schedule 40 pipe that is buried apprx 10" leading into the house. I'd like to put a planter in the spot above it that could have a max load of 330lbs. If not, how may i protect the pipe? thanks for your input.

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: bernabeu (SC)

If, I repeat IF, the 'fill' BELOW and ABOVE the pipe was properly compacted there is no problem.

If you are really concerned you could install a 'layer' of graded stone fill ABOVE ground to ensure distribution of weight and no 'sinkage' of the planter.

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: hj (AZ)

That planter is going to have a flat bottom so the load per square inch is going to be negligible at the pipes depth.

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: packy (MA)

yeah, a planter that weighs 300 lbs with a footprint of 10 x 30 (300 sq in) would exert 1 lb per square inch.

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: bernabeu (SC)

? and what happens when it gets very wet in TEXAS and the ground turns to mud ?

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: hj (AZ)

The planter STILL stays on top of the ground and the pipe is happy with its life of ease. Did you expect it would sink out of sight and become a future acheaoligical relic a thousand years from now?

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: bernabeu (SC)

you are probably correct

PROBABLY being the key word


NASA thought that Challenger would probably work well during freezing cold weather.

PROBABLY (again) being the key word



It is PROBABLY NOT a good idea to place heavy items above improperly laid shallow piping.

PROBABLY being the key word

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: hj (AZ)

I PROBABLY would not give it a second thought, assuming I even gave it a first one.

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: sum (FL)

PROBABLY > DEFINITE MAY BE > SOMEWHAT UNLIKELY

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: bernabeu (SC)

MAYBE TRUE / MAYBE FALSE

Definitively

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

Post Reply

 Re: How much weight can you put on Schedule 40 2" pipe
Author: angrycannibal (NV)

If you found a way to balance the planter, you could probably put that planter directly on that pipe and not have any issues. With it 10 inches below the surface of soil the amount of force on it is going to be trivial.



Edited 1 times.

Post Reply





Please note:
  • Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
  • Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
  • Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
  • Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.

Search for plumbing parts on our sponsor's site:




Special thanks to our sponsor:
PlumbingSupply.com


Copyright© 2024 Plbg.com. All Rights Reserved.