Welcome to Plbg.com
Thank you to all the plumbing professionals who offer their advice and expertise

Over 687,000 strictly plumbing related posts

Welcome to Plbg.com the PlumbingForum.com. We are the best online (strictly) PLUMBING advice, help, dyi, educational, and informational plumbing forum. Questions and discussions about toilets, sinks, faucets, drainage, venting, water heating, showers, pumps, and other exclusively PLUMBING related issues. Please refrain from asking or discussing legal questions, pricing, where to purchase a product, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups. We do not sell your information. We are made possible by:  

Post New
Search
Log In
How to Show Images
Newest Subjects
 Low Flow to Rohl Side Sprayer
Author: jkipp96595 (DE)

Can you adjust the water flow with a Rohl 9.03272 Rinse Connector? We had to replace the sprayer hose due to a pinhole leak and now the flow to the sprayer is much lower than we want? What can we do to increase the flow to our sprayer and, in turn, reduce the flow to the faucet (Rohl U.4719 - Georgian Era Bridge Kitchen Faucet)?

Can you also change the mix of hot and cold water to the sprayer with this connector? If so, how do you adjust this mix?

Many thanks, in advance, for your help!

Post Reply

 Re: Low Flow to Rohl Side Sprayer
Author: packy (MA)

not much info ut there about this faucet.
there generally is a diverter in the hose connection at the faucet end.
to my knowledge they are not adjustable but they can get clogged with debris.
maybe rohl can send you some info along with a new diverter. that may help ??

Post Reply

 Re: Low Flow to Rohl Side Sprayer
Author: Tom130 (IL)

It looks like there's a diverter under the spout part number 9.13362 . You could try cleaning or replacing that. There is an exploded parts diagram at [images.salsify.com] . That faucet has a limited lifetime warranty, you could try contacting Rohl to see if they'll cover it.



Edited 1 times.

Post Reply

 Re: Low Flow to Rohl Side Sprayer clap
Author: jkipp96595 (DE)

Thank you for the information. I will reach out to Rohl for part replacement and additional installation info.



Edited 1 times.

Post Reply

 Re: Low Flow to Rohl Side Sprayer
Author: bernabeu (SC)

both the sprayer AND the faucet should NOT be flowing at the same time

when the sprayer is 'activated' the faucet should go 'off'

the flow rate is determined by the valves (the lever handles)

BOTH the faucet and the sprayer have aerators

you may simply need to clean the sprayer's aerator to restore the faucet to 'pre hose change condition' (which, if both flowed at the same time, was in need of service ANYWAY)

- - - -

Retired U.A. Local 1 & 638
"Measure Twice & Cut Once"



Edited 1 times.

Post Reply





Please note:
  • Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
  • Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
  • Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
  • Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.

Search for plumbing parts on our sponsor's site:




Special thanks to our sponsor:
PlumbingSupply.com


Copyright© 2023 Plbg.com. All Rights Reserved.