Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
NewbLT (MI)
Keeping in mind that I know nothing about plumbing, we have a leak at the P Trap under the kitchen sink. Water wells up from the nut at the joint where the P section joins to a short pleated looking piece (I’m assuming for flexibility in alignment?) coming from the T under the two sink drains. My husband has replaced the gasket there, but it still leaked. We tried putting plumbers putty under the nut since it looked like there had been some there before when we took it apart, and it helped for a couple weeks, but is now leaking again. I’d appreciate any help.
|
Post Reply
|
Author:
packy (MA)
if you were able to stop the leak for 2 weeks then it can be stopped for good. instead of putty around the washer, use some good grade plumbers pipe dope to help the washer seal.
[www.lowes.com]
smear some around where the washer sets into. then slide the washer down and smear some more on top.
|
Post Reply
|
Author:
bernabeu (SC)
if you presently have a rubber 2 X 1-1/2 washer replace it with a plastic one
2" trap needs a reducing washer for a 1-1/2" tailpiece
the rubber 'standard' ones are tricky to seal ESPECIALLY if there is any misalignment
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
sum (FL)
when you say the pipe is pleated do you mean you have something like this?
also do you have a garbage disposer? If so does the leak seem more pronounced when you turn your GD on?
|
Post Reply
|
Author:
NewbLT (MI)
Yes, similar to that. No garbage disposal.Thanks.
Edited 1 times.
|
Post Reply
|
Author:
NewbLT (MI)
That won’t glue it in place, will it? Is that the purple stuff I see in some places on PVC?
Thanks
Edited 1 times.
|
Post Reply
|
Author:
NewbLT (MI)
The washer we used is plastic, which kind of surprised me. The husband took it apart, so I didn’t get a good look at the old one. Doesn’t seem to be a difference in size of pipe, so I don’t think a reducer is our issue.
Thanks.
|
Post Reply
|
Author:
sum (FL)
Best to post a picture of what you have so the pros can see what you are saying.
|
Post Reply
|
Author:
packy (MA)
no, it is not a glue it is a high quality thread sealer.
|
Post Reply
|
Author:
NewbLT (MI)
Thanks. I will have to get some when I go to town. We had tried putting more putty where water drops were squeezing through, and tried tightening the nut further (but still only with hands). Leak is actually worse.
|
Post Reply
|
Author:
NewbLT (MI)
Trying to post image here
Edited 2 times.
|
Post Reply
|
Author:
nosweat (FL)
Your P trap setup looks more like an S trap.
Also, I believe the strainer tailpiece should be in the longer end of the "U"
|
Post Reply
|
Author:
bernabeu (SC)
ditto
the trap 'piece' is reversed
the corrugated tube serves no purpose as there is NO mis-alignment
the unvented 's' trap is NOT code compliant
you need a plumber to come and fix the 'mess' - simple job including adding an AAV
BUT
you can simply stop the leak by reversing the trap 'piece'
for example:
the shorter end is a swivel connection NOT designed for a tubular pipe
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
NewbLT (MI)
Oh wow. Had no idea about all of this. I guess I should have wondered why the guy who installed this for us 20 years ago was available. Thanks so much to everyone who answered. You guys are great!
Edited 1 times.
|
Post Reply
|
Author:
bernabeu (SC)
Quote
..... the guy who installed this for us 20 years ago .....
the key word is guy (as opposed to plumber)
? Why are people so adverse to plumbers doing plumbing ?
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
packy (MA)
it is a prettu easy job to get your undersink piping up to code and leak free.
a plumber can redo the piping to look very similar to this.
not a big job at all...
|
Post Reply
|
Author:
NewbLT (MI)
So taking out the second part of the “s” and replacing it with a vent, in simple terms. Cool. Thank you so much for the help.
|
Post Reply
|
Author:
NewbLT (MI)
You are so right, sir! At the time we were in a hurry to get me moved into the house we had bought where I had just gotten a new job a few hours away from where we had been living. The “guy” replaced an awful old metal kitchen cabinet/sink combo with regular cabinets and this sink & plumbing mess. I’m surprised now that it took it over 20 years to leak!
Thanks again. You plumbers are the best.
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|