Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Tom the Elder (CA)
My residence has 2 water heaters. One, a 21 year old 40-gal gas fired tank, serves only the kitchen and laundry room. I would like to replace it with a smaller electric tank*. I can get 10, 15 nd 20 gallon electric units at Home Depot but I cannot find any info on an appropriate size for the limited deman at this location. What size do you recommend?
Also, it appears Energy Guides and efficiency factors are not available for tanks smaller than 30 gallon. Can you give me a ballpark idea of how energy use of these smaller tanks compares with a 40 gallon tank? Thanks.
*I would like to have gone tankless but have hard water. The smallest gas units available are 30-gallon and all too tall for the existing space.
|
Post Reply
|
Author:
bernabeu (SC)
as we use only warm or cold water for laundry and a dishwasher uses about 4 gallons i would get a 20 which will actually supply 10 'hot' gallons
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
hj (AZ)
Normally, 6, 10, 12, and some 20 gallon heaters run on 120 v. power, which reduces the recovery speed, but since those applications and NOT very demanding, almost any small one should work.
|
Post Reply
|
Author:
Tom the Elder (CA)
Thanks bernabeu and hj. Most of the energy used for this tank is probably standby heating. Would a timer on the circuit (something like 12 hrs on, 12 hrs off) be likely to make much difference in energy use?
|
Post Reply
|
Author:
bernabeu (SC)
not worth the time / money spent on it
keep it simple
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|