Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
LI Guy (IN)
As many of you know we sold the old 1917 four square on Long Island and now live in Noblesville, IN and are back to dealing with well water and septic tanks. We just bought this house in May so I'm still exploring all the moving parts. The basement is finished with a suspended ceiling, and I was exploring the other day and found this beauty.
The 2 upstairs baths were "refreshed" not too long ago, meaning minor cosmetic improvements. For example in the master bath, they added a 36x48 fiberglas shower enclosure with a tile border, but left the original 1980 Delta single handle shower valve.
Underneath the shower pan, the drain lined up directly with the 2x10 floor joist, so obviously the joist had to go....hoping this was NOT the work of a licensed plumber....
- - - - - - -
Not a plumber by trade but a fierce DIYer
|
Post Reply
|
Author:
packy (MA)
a piece of plywood glued and screwed to the other side of that joist along with this offset drain and you should be OK.
|
Post Reply
|
Author:
sum (FL)
definitely not the work of a licensed plumber. You can see he numbered his fittings 1, 2, 3, 4 and measured and marked on the fittings with a sharpie to help with alignment. That's the kind of things I do, a pro has no time for that LOL.
|
Post Reply
|
Author:
LI Guy (IN)
I know, I do the same thing LOL
- - - - - - -
Not a plumber by trade but a fierce DIYer
|
Post Reply
|
Author:
bernabeu (SC)
a pro DOES have the time BUT the marks are done with grease pencil much smaller then wiped off
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|