I need to find the top most Pvc Reducer in the picture I linked. There seems to be 2 reducer fittings connected. I had removed and discarded the top most Reducer. since I need to replace it, I bought a 2 inch to 3/4 inch Reducer, but the spigot is flush with whatever is there.

Picture here:

[i.postimg.cc]



Edited 1 times.

Not sure what your asking there is no pic a spigot just a male adapter an 2 reducing bushings

That top most reducing bushing. I cannot determine the size of that. I assumed it would be 2 in by 3/4. But when I purchased a 2-in by 3/4 I could not replace it because the second bushing would block the 2-in bushing. Since the pipe is 2 in, and there are two bushings, what could be the size of the top most pushing?

the lower bushing is upsidedown. it has a stop in its bottom which is now ontop.

Good luck installing a bushing "upside down", the bottom one is 2 x 1 1/2, then a 1 1/2 x 1 1/4, then the upper one is 1 1/4 x 1. The pipe is 1". Not sure what you are trying to do, because your description is somewhat garbled.

I think the bottom is a male adapter, then 2 bushings.

Measure the inside diameter of the pipe and that's the pipe size your gonna have to cut it anyway

are you going to make this repair under water? This is an in-ground pool connection?