Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
rhock (NJ)
I have a toilet that is about 25-30 years old. I recently noticed that the brass bolts are rusted. How long, I don't know. There are no leaks or issues with the toilet. Do I need to replace bolts now or when should I replace the bolts and wax ring?
|
Post Reply
|
Author:
mr leak (CA)
Straddle the toilet and see if you can gently rock it side to side if not leave things alone for now
|
Post Reply
|
Author:
hj (AZ)
Brass bolts do not rust. You should probably replace your steel bolts now with brass bolts.
|
Post Reply
|
Author:
bsipps (PA)
30 yrs old, your not just replacing the bolts its gonna be the toilet supply line,possibly the supply valve and by then might as well get a new toilet just keep that in mind beforehand, but eventually the rusty bolts have to be replaced
|
Post Reply
|
Author:
packy (MA)
i'm with mr leak on this one.
you have to realize that if the steel bolts and nuts are rusted that you have about 1 % chance they will unscrew.
you will have to cut them off and risk damaging the toilet.
|
Post Reply
|
Author:
rhock (NJ)
Thank you all for your input/help.
|
Post Reply
|
Author:
hi (TX)
When you replace the bolts make sure you do it in the correct method. Inside of the tank just put one rubber washer, and outside of the tank put a metal washer and tighten the nut down. If you put a metal washer inside the tank it will leak. Personally I like to use a Wingnut on the outside of the toilet bowl 5/16".
content://com.android.chrome.FileProvider/images/screenshot/16128749749631677982639.jpg
Source for solid brass bolts, big box Orange store has stainless steel bolts not quite as nice because the head isn't as big but still very nice
See the picture on this link about the correct method of placing the bolts and the side the toilet tank. Many of the manufacturers even have the metal bolts inside the tank but don't do it
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: