Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
John P. Krumsky (PA)
Please help, I have a 30/50 pressure switch,the problem is the well kicks on at 30 and then shuts off at 36 and a few seconds it turns on again to 40ish then shuts off and in a couple seconds it kicks on again and then shuts off again it dies this till it reaches 50. And then shuts off till the draw down kicks it back on again at 30 and does the same thing till 50. I am on my 3 pressure switch and replaced the 3" nipple too. The pressure tank has 29 psi of air. Also replaced the check valve in the well pipe in the house. Everyone I ask is stumped, please help.
Thank you john
|
Post Reply
|
Author:
bernabeu (SC)
? failed/failing or 'tripping' internal motor overload safety ?
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
John P. Krumsky (PA)
I replaced the pump in 2003,so I guess thats my next step, just hoping it was something stupid.
Thank you..
|
Post Reply
|
Author:
bernabeu (SC)
MY question would be: IF it is the overload WHY does it fail/trip ?
? improper wire size / connection ?
? wrong pump for application ?
perhaps it is time for a pro BEFORE you perform additional 'shotgun' maintenance
MERRY CHIST MASS and/or HAPPY HOLY DAYS
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: