Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
ajay (Canada)
My kitchen mixer is wobbling at its base. So i looked underneath the sink to see if there are nuts i could tighten, but i didnt see any. i have been 'googling' if this is type of installation exists but i couldnt find anything.
This is a mixer with spray hose and appears to be a relatively new.
i see two sets of threaded stems with what appears to be some rounded metal washers flush with the cabinet from the bottom side. but no nuts on these threaded stems to screw and tighten.
can someone suggest how i could go about securing the mixer?
Thanks
|
Post Reply
|
Author:
NP16 (OR)
this is one of those faucets where the installation is done from the top side.
you have to remove the spout and then you can tighten the spring loaded mounting assembly with an Allen wrench.
|
Post Reply
|
Author:
ajay (Canada)
I made an error in my link. Please see my next post where my image links do work.
Edited 2 times.
|
Post Reply
|
Author:
ajay (Canada)
which brand of mixer is this likely to be? - thanks
|
Post Reply
|
Author:
Curly (CA)
For me, the picture of the mounting hardware of the faucet is to far away to make out any detail.
Can you get a picture that shows more detail ?
I do not recognize the brand.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: