Welcome to Plbg.com
Thank you to all the plumbing professionals who offer their advice and expertise

Over 698,000 strictly plumbing related posts

Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:  

Post New
Search
Log In
How to Show Images
Newest Subjects
 3/4 in. Copper 22-1/2 Degree Elbow
Author: syakoban (NJ)

Does this exist? I can't find it anywhere, even plumbingsupply.com

Post Reply

 Re: 3/4 in. Copper 22-1/2 Degree Elbow
Author: srloren (CA)

I believe they do make them. If you are using soft copper you could heat the tubing and bend it very carefully so it does not squeez the tube to diminish flow.

Post Reply

 Re: 3/4 in. Copper 22-1/2 Degree Elbow
Author: NoHub (MA)

Ive never seen them...always had to roll a 45 with a couple of st 45's and you can make any angle you want.

Post Reply

 Re: 3/4 in. Copper 22-1/2 Degree Elbow
Author: srloren (CA)

Yes and I have also done that. Particularly when the pipe is larger...

Post Reply

 Re: 3/4 in. Copper 22-1/2 Degree Elbow
Author: bernabeu (SC)

not READILY available except for Drainage Fittings

simply 'spot anneal' the hard 3/4 tube and bend as required

but, if you need MANY:

[www.copperfitting.in]

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

Post Reply





Please note:
  • Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
  • Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
  • Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
  • Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.

Search for plumbing parts on our sponsor's site:




Special thanks to our sponsor:
PlumbingSupply.com


Copyright© 2024 Plbg.com. All Rights Reserved.