I need to glue something to shower glass tiles. I need something that’s semi permanent and won’t come off easily like typical sealant would. But I don’t want anything that’s totally permanent and will destroy the glass tiles later when removing the glue.

This is really hard to explain, but I need to glue the flat portion of a sprayer showerhead “stay” that’s normally affixed to the wall with self adhesive tape. But that tape is useless so I want to glue it in.

What type of glue shall I use?

What I need to glue is the round piece directly in the center of this:

[i.postimg.cc]

yikes, I have no idea..
maybe something what will stick well but can be removed with heat from a hair dryer?
if such a product exists?

CLEAR 'Gorilla Glue'

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

Clear gorilla glue it is. Thanks! I think I'll use it to glue, let dry, then chaulk with regular sealant around the edges to prevent water from getting to the glue.



Edited 1 times.

for clear gorilla glue you need to damp one side and clamp it for a while (2 hours minimum). On a shower you might have to take a tension bar or something to prop it against the opposite wall.



Edited 1 times.

I'd use 100% silicone.

According to the tech specs on the Gorilla Glue web site,
[www.gorillatough.com]

"Water resistant – not recommended for continual water exposure"

I would also vote for 100% silicone, from 3M or DAP.



Edited 1 times.