Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
sum (FL)
I have an exterior bar sink and I need to replace the bar faucet.
The single handle bar faucet I have has both the hot and cold water supply hoses. Yet I have only a cold water supply line and stop valve underneath. I can think of various ways to make the connection, what is the "right" way if there is one?
- find a plug or something to plug off the hot water hose nut. I think it's a standard 3/8" nut.
- some sort of a tee connection to the angle stop valve that allows both the hot and cold hoses to connect to it.
- change out the stop valve to a dual stop valve and connect both hoses to it.
|
Post Reply
|
Author:
Curly (CA)
Change out the stop valve to a dual stop valve and connect both hoses to it.
|
Post Reply
|
Author:
hj (AZ)
Either #2 or 3 will work, but #2 is easiest.
|
Post Reply
|
Author:
NP16 (OR)
Probably code to have hot water there especially if there's any food preparation.
Hire an electrician to bring power there (unless it's already there?)
Then install "3000W Mini Electric Tankless Instant Hot Water Heater with LCD Display for Home Bathroom Kitchen Washing US Plug 110V (Red)". Available at very low cost.
Edited 1 times.
|
Post Reply
|
Author:
Paul48 (CT)
There's a lot cheaper ways to get hot water in FL.
|
Post Reply
|
Author:
sum (FL)
I have power there, both 120 and 240V, but won't be needing hot water. It's an outdoor bar sink. The cold water coming out of it is usually too hot so I let it run for a bit before it reaches "room temperature". Food preparation is a charcoal BBQ grill next to it. An ice maker there would be great.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: