Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
sum (FL)
I have always understood that one can only run cold water through SCH40 PVC pipes outside of the building. No PVC inside a building and no hot water through them.
What about an electric heater for an outdoor jacuzzi/spa? They are integrated into part of the pool pump/filter network and on the outlet side it's hot water that runs back to the spa.
Looking at the heater and many other pool or spa heater it's always PVC piping on both the inlet and outlet sides. Is that OK? Why is it OK to run hot water through a pool/spa heater?
|
Post Reply
|
Author:
marlinman (FL)
In checking, Spa heaters have a limiter set at 104 degrees. PVC pipe is rated at 140 degrees.
|
Post Reply
|
Author:
LI Guy (IN)
Our previous home in NY had an inground pool with a 350,000 BTU nat gas heater. 1-1/2" copper was required to connect to the manifold at least 24" before changing to 1-1/2" PVC on both the in and out ports.
Also worth noting was that the heater was wired in through the pump timer such that it would shut the heater down at least 15 mins before the pump turned off, so it had a cool down period that prevented the water getting too hot for the PVC pipe.
- - - - - - -
Not a plumber by trade but a fierce DIYer
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: