That won’t pass inspection, you need to use a banded fernco and also should be a sani-tee not a wye.

I sure hope fresh primer and top quality solvent was used and that's schedule 40 or 80.

Actually, to insure proper flow they should both be "twin/two way/double 1/4 bend" elbows".

Jake (hj) of course is right on. As I understand it there's a patent pending on that fitting so others are stuck and will have to buy them from that monopoly company that charges $199 ... at least the buyers do get one more for free (plus shipping and handling).

under $30, less than the DIY rube goldberg

==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

But only if you order within the next 30 minutes.

hj,

nope - this is for real - boot dryers have been around a LONG time

they range $19.96 (junk) to $70 (top-o-the-line)



==============================================

"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638

geesh bern, thanks for bursting my bubble...
i was getting ready to contact phil swift to make an infomercial for my $19.95 BOGO boot warmers..
oh well, back to the drawing board..

I was replying to Vic's offer of a second one free, just pay S&H.

You might try suing for patent infringement.

suing wouldn't cost be anything, my son is a lawyer..

I am sorry to hear that. I guess he used to be a good person. Just remind him that there is only ONE lawyer joke. All the rest are true.