Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
EdB (WA)
I am trying to find new show/tub trim kit for my shower. The house is 40 years old and the valve is original.
The stem is round with a flat surface on top and bottom. It operates by pulling out to turn on and adjust pressure, and rotate to adjust hot/cold.
Is that enough information to identify the brand of products that will fit? Appears similar to Moen, but most of their products are a posi-temp, that does not operate the same... Any ideas?
Thanks for any and all help.
Ed
|
Post Reply
|
Author:
steve (CA)
Post pictures here of what you have.
|
Post Reply
|
Author:
EdB (WA)
Here are the pictures... I think...
|
Post Reply
|
Author:
srloren (CA)
40 years old... if the copper is coming up through a concrete slab you had better put money aside for a Re-Pipe. You must have good water chemistry and or good soil conditions to last this long assuming the copper is underground. I have a friend in Battleground, WA that replaced his a couple of years ago. That valve looks like an older Moen Shower/tub valve. Go to Moen.com and email the photo to customer Support for verification. Good luck.
|
Post Reply
|
Author:
NP16 (OR)
1225 cartridge.
Edited 1 times.
|
Post Reply
|
Author:
marlinman (FL)
Moen just calls it their "Standard Valve". If you are wanting a special finish instead of chrome you can use a Moentrol trim if you install a 145058 adapter plate shown in the link.The Moen escutcheon screws for the Standard valve are side by side and the Moentrol screws are on the diagonal. The plain chrome trim for the valve is # T470.
[www.moen.com]
|
Post Reply
|
Author:
EdB (WA)
Exactly the info that I was looking for. Thanks
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: