Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
120volts (CA)
I have a jacuzzi tub that will not be used by the owners in the future but there seems to be a missing top plate or cover for the handles?? Shower works fine and that's all they want. They just want it capped so water won't seep in and make it look nicer. Any ideas what I can use on specifically?
[i.postimg.cc]
|
Post Reply
|
Author:
bernabeu (SC)
[www.tmhardware.com]
I would suggest 3" x 12", mounted using silicone adhesive.
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
120volts (CA)
Yes, but I want to not removed the protuding handles but find something that just fits over it??
|
Post Reply
|
Author:
bernabeu (SC)
the 'protruding handles' are simply a screw and 'something' broken held by a screw
ask the customer what THEY want
a 'pro' finish OR a rube golberg abortion
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
hj (AZ)
What would you consider a "pro solution", because anything that just covers the openings WILL be "Rube Goldberg" solution.
|
Post Reply
|
Author:
bernabeu (SC)
A 'cut to size' aluminum plate 'siliconed' into place with choice of surface finish (polished or matte).
This plate is made from .125" thick, high quality aluminum.
It will create a smooth transition with a neat and tidy impression for all your home, office and commercial needs.
as per: [www.tmhardware.com]
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
120volts (CA)
Thanks on all the suggestions!
Can I remove the handle screws without having to worry about the valves kicking on? I'm just worried if I unscrew them I won't be in a point of no return and not be able to shut things off.
|
Post Reply
|
Author:
bernabeu (SC)
... not sure ...
? are there angle stops to isolate the valve ?
? is the shower separate or is there a diverter ?
IMO: Either,
replace the actual valve trim
or
close the angle stops before 'blanking off'
or
'walk away' from this nightmare job
or
do whatever the customer wants (in writing).
BEST OF LUCK
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: