Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Techguy (DE)
Hello. I have an old (18 years) 80 gallon electric (gas not available) water heater in a Myrtle Beach 3 bath Condo. Large capacity is for a Jaccuzzi in the master bath. I’m preparing to replace it. Earlier post suggested a tankless should not be used. Thanks to those that offered advice.
Are there any better replacements than going with another 80 gallon size? Would like to save energy with seasonal rentals and space in the utility closet. Don’t want to sacrifice comfort. Any models or suggestions appreciated.
Thanks!
|
Post Reply
|
Author:
NoHub (MA)
They don't make 80 gallon electric water heaters any more.I suggest 2- 50 Gallon heaters.And tell The Plumber to pipe them Parallel and not in series...in series the first heater take a beating,Parallel the water draws evenly.
Edited 1 times.
|
Post Reply
|
Author:
hj (AZ)
quote; Parallel the water draws evenly.
In theory, seldom in practice.
|
Post Reply
|
Author:
packy (MA)
[www.homedepot.com]
turn the lower element down to 90 deg so you will be using just the top element. you can adjust it back up when you have a heavy demand.
|
Post Reply
|
Author:
Plumbum (Canada)
Yep hj
Less fittings, less labor, less balancing, less.. more performance
Just do it like a steamfitter. First served, first returned.
[www.hotwater.com]
|
Post Reply
|
Author:
bernabeu (SC)
... otherwise known as 'reverse return' ...
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
packy (MA)
supermarkets call it LIFO...
last in first out..
thats why the milk is always in the back of the store..
|
Post Reply
|
Author:
Plumbum (Canada)
Why that would be called.....
"Direct return"?
Directly to the recycle place?
Nice humor!
plumb
|
Post Reply
|
Author:
NoHub (MA)
I have no problem with that,what I'm taking about is the hot from one water heater going into the cold of the second,Then we can see a problem and thats what some people call "series". You see this mess all the time.
|
Post Reply
|
Author:
bernabeu (SC)
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|