Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
waukeshaplumbing (WI)
i am looking for a mixer location for a ada bathtub
i can find some written explanations, but there are 2 ways to interpet it
i want to know if i can put the valve over the overflow on the centerline of the tub (just like a normal residential tub would look)
some definitions tell me the valve can be located from the center to the open side.....but the definition of what the center is is where the confusion is.....if you include the skirt in your center measurement the true center of the tub is not where the overflow is...it would be 1"+ to the left
|
Post Reply
|
Author:
steve (CA)
From the DOJ website...
|
Post Reply
|
Author:
waukeshaplumbing (WI)
that is also my interpetation of the code....the valve cant be in the center/lined up with the drain
its going to end up 1-2" off center
thanks!!!
|
Post Reply
|
Author:
don plumber (MA)
IN fig. 607.5 the valve has to be off center.The valve would have
to go in that shaded area. I think the vale would go in between
the center line of the tub and the rim or skirt.Making the valve off center
by 4 or 5 in.
Mabey the reason being is for someone in a wheelchair
could access the valve with out bending into the tub.
|
Post Reply
|
Author:
hj (AZ)
Also, any one in a wheelchair probably has a "nurse" helping them so an offset valve would be more accessible to that person also.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: