Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Plumb Dumb (NY)
We are having our bathroom remolded. Replacing the lead bend is not included in the contract, but we were told that if there was a problem with it would have to be replaced and would cost extra. The lead bend is about 30 years old. The plumber just told us he wants to replace it. But we can't get a straight answer why it needs to be replaced.
If it is broken, or there is a legitimate reason for why it needs to be replaced, then we have no problem replacing it. But if it is just a case of recommending to replace it because "why not? we have access to it now" then we would prefer to leave it if we can. The renovation of the house has already gone wayyy over budget.
A few questions:
1) How long can lead bends last? 30 years doesn't seem that old to us, we have lead bends in our house that are probably almost 100 years old and are still working.
2) Are lead bends typically replaced when renovating, even if nothing is wrong with them? If it is NOT damaged, why would we need to replace it?
3) Is it ok to leave it if it isn't damaged?
Thanks!
Edited 2 times.
|
Post Reply
|
Author:
packy (MA)
if the floor is already ripped up, i would go ahead and replace it.
as long as it doesn't have other drains tied into the side (tub/shower/lav?) it is about 45 minutes work..
Edited 1 times.
|
Post Reply
|
Author:
NoHub (MA)
It's a lot older than 30 years if it is indeed a lead bend...if it's lead get rid of it while you have the chance. Post a picture it you can.
|
Post Reply
|
Author:
hj (AZ)
Many areas STILL use lead bends, so you cannot tell the age by that.
|
Post Reply
|
Author:
NoHub (MA)
No Kidding hj,were can I buy one?
|
Post Reply
|
Author:
UPCMaster (CO)
That is a no brainer.Replace it for sure as well as any Cast iron or galvanized water pipe,It can cause you problems down the line.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|