Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
mike1161951 (AR)
Recently water pressure has dropped when a second valve is opened at my home. This seemed to happen overnight. Now when the toilet stops running in the master bath there is the sound of water running for about 8 or 10 seconds then stops. This has been going on for about a month now. I've tried opening all the valves and letting the water run along with washer and toilets to possibly flush out air that may have gotten into the lines, but no success. Any ideas?
|
Post Reply
|
Author:
North Carolina Plumber (NC)
It sounds like a clogged pressure reducing valve. It's taking 7 or 8 seconds for the pressure to equalize after the toilet has finished filling.
|
Post Reply
|
Author:
mike1161951 (AR)
I wondered about that in the beginning but thought water just passed through the valve where it was reduced and stopped when the flow was turned off. I didn't know it allowed for "equalizing" the pressure also. I'll check into that as soon as I have some free time. Thanks. I'll post back afterwards also.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
Under normal circumstances, the pressure will equalize immediately , but when the screen is clogged, it takes a few seconds for the pressure to reach the set limit, I feel sure that's what's causing the noise you hear.
|
Post Reply
|
Author:
Silverlane (WA)
Any update on this? Thanks
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: