Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Bluerex85 (Non-US)
Hello,
Running into a bit of problem and see if this is something that is solvable without calling the plumber.
So my shower pressure always dips a little after I flush the toilet, but it always goes back up soon after. This morning however, not only did it not go back up, it kept dropping.
If I shut it off for a few minutes, and turn it on, I would get full pressure for maybe 10-15sec, then it go back to being very low.
This was all coming out of the facuet, so I can rule out its a shower head problem. Check the toilet and it does not seem to be leaking. The sinks in the same bathroom works, and other showers is working as normal as well.
I have a single knob made by delta.
Thank you in advance for any advice!
|
Post Reply
|
Author:
NoHub (MA)
You need a new cartridge, post a pick and we'll tell you with one.
|
Post Reply
|
Author:
Bluerex85 (Non-US)
Thanks for the advice.
However, with further testing, it seems like the problem is actually all around the house.
The same thing happened around the house. If we leave any open long enough, the water pressure drops significantly.
Any idea what may be the cause? Or is plumber the way to go?
Thanks!
Edited 1 times.
|
Post Reply
|
Author:
Wheelchair (IL)
Much depends on many factors. The age of your house, The size of your pipes and supplies. Materials used, such as copper vs galvanize. Do you have well or city supplied waters? How far from the supply are you.
Best Wishes
|
Post Reply
|
Author:
DaveHessler (MN)
Do you have city water or a well? Could it be the pressure tank?
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|