Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
rriker (NY)
I'm installing a washing machine outlet box for an existing washer. The drain is 1 1/2" and hasn't ever given me any problems. The issue is that in order to install the outlet box I have to put an offset in the drain so it will line up properly. My plan was to use two 45s to accomplish the required offset. Will this cause me any problems?
Thanks, in advance, for any assistance you may offer.
|
Post Reply
|
Author:
bernabeu (SC)
the standpipe should be as straight as possible
if 2 - 22.5 degree els would work, order them from a plumbing supply
make sure the pipe ends are square cut and burr free
best of luck
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
packy (MA)
while you have the drain open, run a snake wire down it to scour it nice and clean. you will have no trouble with a 45 deg offset.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: