Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
nhdon (VT)
Hello,
I am installing a dishwasher and need to replace the hot water shut off valve with one that will supply hot water to the faucet and the dishwasher. The problem is that the existing 1/4 turn shut off valve won't come off...it just spins and spins(it looks like it is fitted over a plastic sleeve). I can't remove it or tighten it.
Can anyone tell me how you remove this type of valve? My concern is that it is some type of fitting that is in place over the pipe that connects the valve, which means I won't be able to swap it out.
Any help or suggestions would be appreciated.
Thanks
|
Post Reply
|
Author:
m & m (MD)
You seem to be describing a "SharkBite" type compression valve. If so, it is removed by releasing the locking mechanidm and lifting it off. I'm sure YouTube would have something on this subject.
|
Post Reply
|
Author:
packy (MA)
it is also possible that it is compression stop over pex ???
a photo would help..
|
Post Reply
|
Author:
nhdon (VT)
Thanks...it is apparently a sharkbite valve....and annoyingly, I don't have a sharkbite dual outlet valve(if there is such a thing) to install this dishwasher. I will never hear the end of this!
Edited 1 times.
|
Post Reply
|
Author:
m & m (MD)
Remove the valve. Install a "SharkBite" tee. Install two "SharkBite" valves, one for the faucet, one for the dishwasher.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
Whatever you do, you need a separate valve for the dishwasher, and a valve for the kitchen faucet.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|