Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Suffolk5 (NY)
The stopper will not seal against the seat even with the lift rod disconnected and my wife pushing on the stopper. I have replaced the stopper and seat. The faucet is approx. two years old and has always done this.
|
Post Reply
|
Author:
packy (MA)
??? leaking thru from where the drain flange meets the sink???
|
Post Reply
|
Author:
North Carolina Plumber (NC)
Probably, you can watch the drain flange closely and usually see the water drain down to a level lower than the rim of the flange, if so it's a sure bet it's leaking around the flange.
|
Post Reply
|
Author:
Suffolk5 (NY)
It doesn't appear to be leaking between the flange and sink. Wouldn't there be water in the vanity if that were the case? The vanity is dry. Could the stopper and flange not seat right?
|
Post Reply
|
Author:
Suffolk5 (NY)
It keeps leaking until there is no water in the sink at all. If it is leaking around the flange wouldn't there be water in the vanity? It is dry.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
No, if it's leaking around the drain flange, the water will still go down the drain, thru the overflow openings in the pop up assembly. As a test you could rub a little plumber's putty or caulking around the flange and see if it holds then.
|
Post Reply
|
Author:
Suffolk5 (NY)
I tried your suggestion about using the plumber's putty and it stopped the leak. The plumber who installed the faucet and drain used putty and so did I when I replaced the flange. I guess putty doesn't work. I'll have to use silicone this time. Thanks for your advice.
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: