Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
murraylberkowitz (NJ)
Do most codes, or filed applications, adhere to the following rule of thumb?
Shielded no hub are used above ground, and non-shielded, neoprene/rubber couplings are used below ground, I saw this on a plumbing web site and I thought it was the other way around. Please advise.
|
Post Reply
|
Author:
packy (MA)
some codes may vary but my code says sheilded inside the building ( above or below grade) and sheilded for a distance of 10 feet outside the foundation.
|
Post Reply
|
Author:
murraylberkowitz (NJ)
Thank you for responding. Am I correct in reading your answer that there is no application in your code for a non-shielded no hub?
Edited 1 times.
|
Post Reply
|
Author:
packy (MA)
we are allowed to use tubular plastic/metal on the inlet side of a trap. that is not much thicker than a toilet paper cardboard tube. you could use a non-sheilded rubber coupling there. (no danger of sewer gas)..
|
Post Reply
|
Author:
hj (AZ)
Not inside a building. Outside, underground is the only place they are approved.
|
Post Reply
|
Author:
packy (MA)
i don't believe my code specifies much about approved materials on the inlet side of a trap.
ISE disposers connect to a discharge tube with a thin rubber sleeve.
dishwasher drains connect with thin rubber sleeves.
|
Post Reply
|
Author:
murraylberkowitz (NJ)
Thank you all for your very helpful responses. much appreciated
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: