Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
CYC (NV)
After removing the handle, the next piece is metal and will not come off after removing the phillips head screw.
Any solutions?
|
Post Reply
|
Author:
Pneuma (WA)
Depending on the model.. the metal sleeve (if thats what you mean) may turn counter clockwise to unscrew and get to the valve.
|
Post Reply
|
Author:
srloren (CA)
Some of the older models have a brass clip that you pull up on. Be sure that your water is turned off and the pressure is drained down from a hose bib or faucet prior to removing the clip. Suggest you go to Moen.com and check out the drawing for the model you have. Send them a photo and age of the valve if you don't know the model number.
|
Post Reply
|
Author:
hj (AZ)
It is corroded on. Either pull harder while "wiggling" it, or use a handle puller.
|
Post Reply
|
Author:
srloren (CA)
HomeDepot has a handle puller made specifically for Moen Valves. They are expensive though. And be aware that sometimes these cartridges get stuck and when you pull the valve stem out with the recommended puller, that only the stem comes out and you must carefully drill out the remaining plastic with the O-Ring seals. BE CAREFUL or you may damage the valve and have to replace the valve. If you are not handy with the tools, you may consider calling your local Plumber.
|
Post Reply
|
Author:
hj (AZ)
"Drilling out" the cartridge is about the best way I know of to destroy it AND the valve body.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: