Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
CharlieHam (KY)
I have a residential home with loft, main floor, unfinished basement, 3 bathrooms and no unusual plumbing or water pumps. The 2 gal. tank is installed on a Tee above the hot water heater and sprang a pin-hole leak yesterday. One estimate for replacement is $350. Do I NEED it? I'm thinking about removing it and putting in a pipe plug in it's place. What do you think?
|
Post Reply
|
Author:
bernabeu (SC)
You do NEED the compression tank.
You may want to DIY - not a really big job.
'Most' tanks attach by a threaded connection.
The 'trick' is the air precharge which varies 'job by job' depending on average static pressure of water supply.
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
North Carolina Plumber (NC)
City water or private well ?
|
Post Reply
|
Author:
hj (AZ)
You DO NEED it, IF, you have a 'closed system' which prevents thermal expansion from being dissipated back into the supply mains.
|
Post Reply
|
Author:
hi (TX)
Maybe just buy one and screw it in yourself They cost about $50 bucks Save $200
[www.plumbingsupply.com]
unscrew the old one, Use teflon tape on threads screw in the new one.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: