Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
ddbbp (KS)
I have a unused 1/2" pipe with a end cap on it.
I was going to put a "quarter turn boiler valve" on the end. I was going to use it as another outlet to drain the system down for repairs or even attach a hose to it.
The "boiler valve" says not to use with potable water.
Is this the wrong type of valve to use for my intended purpose?
Edited 1 times.
|
Post Reply
|
Author:
bernabeu (SC)
you have a 'brass valve' containing a miniscule bit of lead
IMO: if used as a 'dead end' shut off for maintenance purposes you are 'good to go'
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
hj (AZ)
Just do not drink the water out of it and you will be fine.
|
Post Reply
|
Author:
ddbbp (KS)
so isn't the lead a concern with it holding back pressure?
potability aside, isn't this valve for a heating system?
|
Post Reply
|
Author:
hj (AZ)
A vavlve can be used for anything you want to. The amount of lead in that valve, that could get into your water system would probably have to measured by some super sensitive machine. Don't worry about it. We didn't for the past 100 years.
|
Post Reply
|
Author:
holland123 (MI)
I agree, this lead issue in brass is ridiculous, it has actually rendered our brass now unbrazable.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: