Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
svikqc (Non-US)
Hi,
I just signed up here hoping to get some help and advice. I have no knowledge whatsover in plumbing so any help Would be hightly appreciated.
I recently bought a house where in my living room, located in the basement i have a drop ceiling. The problem is that i have 3 visible pipes below my ceiling. I believe they are for my shower and vanity from my bathroom. 2 of them are located close to the wall, on of those are a u-shape while the other is from ceiling to wall about 40 cm long. The u-shape is sticking down showing the part of the U.
The third visible pipe is also a U-shape and this one has a screwcork on it. (sorry for my lack of technical terms).
I checked above the ceiling and it seems like it could be possible to just cut and move the u-shapes but i understand there is norms to consider thats why im asking here since i dont know any plumber.
[tinypic.com]
|
Post Reply
|
Author:
packy (MA)
you can not legally raise that trap. you would create an "S" trap by doing so.
|
Post Reply
|
Author:
mr leak (CA)
What your pictures show are plumbing drain waste pipes
You can lower the ceiling in this area
The metal frames might be for a acoustic panel ceiling?
|
Post Reply
|
Author:
bernabeu (SC)
ditto
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
Paul48 (CT)
What 3 fixtures would necessitate having their traps below the floor?
|
Post Reply
|
Author:
packy (MA)
if he had a tub, a shower and a bidet, that would do it..
|
Post Reply
|
Author:
bernabeu (SC)
some bidets are back outlet
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
packy (MA)
oh bernabeu... i thought we just went thru this? in order to be back outlet the bidet would have to hold water like a toilet. ain't no such thing
or put it this way... you would have a better chance of finding one than the D-backs winning the world series.
|
Post Reply
|
Author:
m & m (MD)
I think this year we can substitute the Soxs (crimson, not ivory).
|
Post Reply
|
Author:
bernabeu (SC)
@ packy,
I thought I made a mistake once ..... but I was wrong
Toto:
[www.falcon18.com]
Duravit:
Geberit Carrier for Bidet:
[www.homeclick.com]
? Others ?
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
Edited 2 times.
|
Post Reply
|
Author:
packy (MA)
i think we are both right. just about any bidet gives you the option of keeping the trap up high and draining it to the wall.
what i'm refering to would be a bidet with an integral trap.
i remember being wrong once but i forgot when that was. :>
|
Post Reply
|
Author:
bernabeu (SC)
When what was ?
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|