Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
TexasBarbara (AZ)
I am concerned that a contractor has put a 6" Chase sleeve (30' in length) in the wrong part of the construction of my RV garage. The contract said to provide and install a 6" Chase sleeve approx 30' long for Future Plumbing Connection to the Proposed Casita. When I inquired where the sleeve was it had not been installed, even though the RV garage is mostly completed. They buried a 6" sleeve approximately a foot away from the back of the foundation of the RV garage. Can anyone out there confirm that this is or is not the proper way to install a 6" Chase sleeve?
I really need your help asap.
|
Post Reply
|
Author:
Don411 (IN)
You should have specified the location in the plans....not sure what you are planning to run in the sleeve but electric needs to be 18" min below grade. Local codes will also specify required depth for plumbing and may prohibit running plumbing and electric in the same conduit.
It would have been cheaper/easier to have the proper plumbing installed from the beginning instead of trying to retrofit through a 6" conduit.
Re-Modeling homes for 35 years.
I am NOT a licensed plumber.
|
Post Reply
|
Author:
hj (AZ)
Unless someone specifies the EXACT location for a sleeve there is no "improper" way to do it. A sleeve is just an empty pipe in the ground and it can go anywhere. Besides, it may be useless for what you plan anyway.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: