Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
grabo (NJ)
Hi,
Moving my laundry room to my basement - big win is that I get to convert to a gas dryer.
My basement is finished - metal studs, drywall, and a layer of thin carpet (on top of cement).
It occurs to me that putting a gas dryer on top of this carpet (even though thin) is probably not the smartest move.
I haven't been able to find anything that says that this is a no-no, except for a handful of dryer manuals that say, "don't install on carpet." Most others don't say anything at all.
My options:
1. Do nothing. This seems like a bad idea.
2. Put the dryer in a plastic pan, like what I'm going to put the washer in (in case it leaks)
3. Rip up the section of carpet that will be underneath the washer and dryer, and either leave it bare cement or put down something prettier (tile?)
Your thoughts?
|
Post Reply
|
Author:
KCRoto (MO)
I would remove the carpet from under the washer and the dryer and install a non-flammable, non-absorptive surface, and one that is preferably easy to clean. Besides eliminating a fire risk, using linoleum, tile, or even bare concrete is a better choice for cleaning up if you have a mess (like liquid laundry detergent) to clean up. If you want the feel of carpet, lay a rug down, or the scrap of carpet that you removed. I would cut the carpet away, then use an edging strip to hold the edges to prevent a trip hazard.
|
Post Reply
|
Author:
packy (MA)
the terminology you are looking for is... "installation on cumbustable surfaces"..
some you can and some you can't.
there are pans that are made so you can do what you want. a plastic pan is not one of them.
i would do as KC recommends above.
|
Post Reply
|
Author:
hj (AZ)
Fire hazard aside, I would not want it on carpet just because of how difficult it would be to move it.
|
Post Reply
|
Author:
bernabeu (SC)
Quote
... "installation on cumbustable surfaces"..
COMBUSTABLE
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
bernabeu (SC)
.... and proud.
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
Wheelchair (IL)
I've never seen carpet at laundry mats or cleaners. That should be a hint.
Best Wishes
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|