Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Dos522 (CT)
While moving around in my bathroom, I happened to mistakenly kick the hot water baseboard. The end cap fell off and I noticed that at the elbow joint where the pipe comes through the floor and into the baseboard there was this rust colored crud all over it. I scrapped some off and it's kind of pasty. I also noticed a whole in the wall that the previous owner covered up with the end cap. As this is my first home, purchased a year ago, I am still trying to learn its little quirks. Does anybody have an idea what could be causing this and if it's part of a bigger problem?
|
Post Reply
|
Author:
george 7941 (Canada)
Is this crud wet or dry? If dry, probably nothing to worry about. Any signs of moisture anywhere?
|
Post Reply
|
Author:
packy (MA)
also, covering a hole in the wall with the end cap is not uncommon.
when it gets warm outside, you could have a heating technician come by and have a look at the water in the heating system. it shouldn't be rusty colored. they can drain the system, flush a cleaner thru it and fill it with clean water with a boiler treatment/conditioner added to it.
|
Post Reply
|
Author:
Dos522 (CT)
Here's a picture of what I'm seeing.
|
Post Reply
|
Author:
Dos522 (CT)
George,
The "crud" is dryish, but I have notice a rust colored liquid on the inside of the baseboard cover.
|
Post Reply
|
Author:
bernabeu (SC)
'seems' to be a 'crappy' solder joint which 'may' be 'weeping'
after heating season get it redone by a 'real' plumber
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
packy (MA)
i see a viega press sleeve attached to fostapex under all that crud. it could be a poor crimp joint or it could be poor solder joint.
in either case it will need to be addressed come warm weather.
also, as i said in my previous post, have a heating tech look at the reason you are getting rusty crud from the heat. that is not normal..
|
Post Reply
|
Author:
Paul48 (CT)
In the meantime....Don't play with it.
|
Post Reply
|
Author:
Dos522 (CT)
Thank you all for your comments and insight. I will let it be for now, but when it warms up outside I'll have someone come out and take a look.
Edited 1 times.
|
Post Reply
|
Author:
Paul48 (CT)
If the bathroom is perpetually cold, that would be the time to upgrade the emitter to something with a higher output.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|