Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Lgokdm (VA)
Thank you so much for your help.
Here is the original installed. It has a hex screw holding it in underneath.
[share.pho.to]
[share.pho.to]
Here it is out -- it didnt really screw into threads. It just kinda pulls in and out.
[share.pho.to]
[share.pho.to]
[share.pho.to]
Here is the hole in the wall. The metal ring is permanently attached to the marble.
[share.pho.to]
Here is my new head
[share.pho.to]
[share.pho.to]
[share.pho.to]
I bought a Universal 8" shower arm w/flange from Danco (item 89179) and the arm is too thick for the hole.
So im lost. Am i screwed because the metal flange (with the hex type screw on the bottom) is permanently attached to the marble? Do i just need a smaller arm? But then whats with the old head not screeing in but kinda just sliding in? Or is this just a crappy job?
Thank you so much for your help b
|
Post Reply
|
Author:
KCRoto (MO)
So let me see if I can put this all together. The set screw on the trim was holding the shower arm in place. The shower arm remained watertight by the use of the two gaskets and slid into a machined surface that was part of the original shower head, presumably so that it had a 360 degree rotation. Now you want to install a normal shower arm and are trying to put it into the machined socket designed for the old shower arm? If this is the case, it won't work. The best case scenario is that the piece containing the set screw will unscrew from a standard drop ear 90 inside the wall cavity, and you can attach your new shower arm and head there. Worst case scenario is that you will have to open the wall up (from the back I hope) and replace the connection with a standard drop ear 90.
|
Post Reply
|
Author:
hj (AZ)
The metal ring is NOT "permanently attached to the wall". It unscrews from a pipe in the wall, but you will also have to remove the pipe after unscrewing the ring, and you may NOT have the tools to do that.
|
Post Reply
|
Author:
Lloyd C (DE)
Installing a shower head just takes a few minutes it does not needs a plumber. . It's usually as easy as unscrewing the old, then replacing it with the new one.
|
Post Reply
|
Author:
hj (AZ)
quote; "It's usually as easy as unscrewing the old, then replacing it with the new one."
Have you looked at his pictures. He does NOT have a "conventional" shower head or arm so it is not that "EASY"?!
Edited 2 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|