Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
dogwood (NV)
would someone be kind enough to tell/show me how to add a additional pressure tank to my well?
I have a jet pump, a 40-60 switch, and a 34 gal bladder tank, useable probley about 20 gallons. I want to add an additional 34 gal or larger tank but I have been told there is a certain way to connect the new tank to the line that goes to the house. I tried this once before and found the second tank was not putting water in the line. I had it connected where the tank #1 was in a straight line to the in house waterline and the added tank was done like a L'' with the long arm of the L connected to the mainline which I cut the pvc and added a T.
I almost need a drawn picture or a web site where I can see it clearly. thanks so much
|
Post Reply
|
Author:
hj (AZ)
YOU put a T in the line out of the existing tank and connect the new one to the T.
|
Post Reply
|
Author:
m & m (MD)
It can 'float' on the line anywhere after the pump discharge. It may or may not need a check valve but we don't know your application.
|
Post Reply
|
Author:
Paul48 (CT)
The air pressure has to be set the same as the tank with the pressure switch on it. You do that prior to installation.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor: