Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
jmay266250 (IA)
Are Pressure Reducing Valves now considered code when building a new home? We had a home built about a year ago and within 6 months we had spiggots and TPR valves (water heater) leaking and garden hoses breaking because city psi is 120# and the plumber who did the house did not put one in. When I contacted the builder he had that plumber come back and put an expansion tank and PRV valve in. Life was good after that until I received a $410 bill and the builder and plumber say it's mine to pay and not included in the 1 year home warranty. Everyone I've talked to so far said this should have been done Day 1. I live in Iowa. Thoughts?
|
Post Reply
|
Author:
Wheelchair (IL)
Someone did not do their homework before the foundation was poured. I believe the plumber did, what was ordered by the builder. If your builder, built other homes in the area, they should have been aware of the high water pressure. You can also ask your water supplier or local inspection authority, if it was required during construction.
Best Wishes
|
Post Reply
|
Author:
hj (AZ)
It would be a local issue. Here, only one city requires a PRV even if the pressure is less than 80 psi. Everywhere else, even though the pressures are high, they are a homeowner option.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
Our code requires one when the pressure is 85 PSI or more.
|
Post Reply
|
Author:
m & m (MD)
Evidently the inspector passed the job without requiring one.
|
Post Reply
|
Author:
bernabeu (SC)
most codes require and MOST fixtures specify 80 psi maximum
check your local code
research and point the GC to the fixture manufacturer's specifications
IMO: you WERE 'raped'
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
mr leak (CA)
Common sense and good building practices would have any pressure 80 psi or greater reduced
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|