Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
Dan0 (TN)
I'm replacing a tub (standard 5', porcelain on steel) and I was thinking about using a 2" trap. Any advantages... or disadvantages?
Thanks
|
Post Reply
|
Author:
hj (AZ)
Easier to snake if it gets clogged.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
We have to use a 2" trap when the tub is sitting on a concrete slab.
|
Post Reply
|
Author:
Dan0 (TN)
Thanks NC...
2" Tub Trap, 1.5" Wet Vent from Vanity...( vent will be above the 2 " tub inlet)
Edited 4 times.
|
Post Reply
|
Author:
hj (AZ)
NOW, you just changed the dynamics. It is one reason why giving advice without all the information is "dangerous". That vent above the tub inlet will be USELESS as far as the tub is concerned. IF the toilet is draining past the tub inlet the tub drain MUST have its own vent.
Edited 1 times.
|
Post Reply
|
Author:
Dan0 (TN)
So... when the toilet is flushed... it's going to try to suck the water out of the tub trap...
Basically, the water rushing by the 2" inlet will flush the trap... just like the camode!
Thanks - I was trying to keep it simple...
|
Post Reply
|
Author:
hj (AZ)
It MAY drain the trap, not flush it.
|
Post Reply
|
Author:
Dan0 (TN)
This has got to be one of the most common arrangements out there...
|
Post Reply
|
Author:
steve (CA)
That sanitary tee, being used for the tub vent take-off, is not a legal fitting in that location. Should be a wye or combo tee.
|
Post Reply
|
Author:
Dan0 (TN)
Thanks!
Edited 1 times.
|
Post Reply
|
Author:
Dan0 (TN)
It's not a big deal to spend a couple extra bucks and put in the fitting that makes it legal... but I'm just curious why you would need a wye or combo for a dry vent.
|
Post Reply
|
Author:
steve (CA)
Any vent piping, below 6" above the flood level of the fixture, shall be installed with approved drainage fittings, material and grade to drain. A sanitary tee is a drain fitting, however it's not legal to install it on it's back(like you have it), when used as a drain fitting.
|
Post Reply
|
Author:
Dan0 (TN)
Something that is not in the picture... I plan to use a 3"Combo, on it's back, at the bottom of this assembly to go from the vertical drop to horizontal... and then tap into th main line. I'll put in a 3" cleanout on the backside.
Do I need a combo, or is a sanitary tee ok? I think I've seen sanitary tee's used in this way...
Thanks
|
Post Reply
|
Author:
steve (CA)
A tee on it's back, used to convey wastes, needs to be a combo. Doesn't matter if the wastes are changing direction, vertical to horizontal or passing straight through with the vertical branch used for a vent.
|
Post Reply
|
Author:
Dan0 (TN)
Thanks!
Edited 1 times.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|