Over 698,000 strictly plumbing related posts
Plumbing education, information, advice, help and suggestions are provided by some of the most experienced plumbers who wish to "give back" to society. Since 1996 we have been the best online (strictly) PLUMBING advice site. If you have questions about plumbing, toilets, sinks, faucets, drains, sewers, water filters, venting, water heating, showers, pumps, and other strictly PLUMBING related issues then you've come to the right place. Please refrain from asking or discussing legal questions, or pricing, or where to purchase products, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing. Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups and we don't tract you. We absolutely do not sell your personal information. We are made possible by:
Author:
ripcurlsp02 (CA)
Hi there. I have an occasional small drip coming from my garbage disposal. I checked all of the pipes and fittings and everything is good. I ran the water and the disposal and sure enough, the leak is coming from inside the disposal.
Are there seals inside the casing or housing of the disposal that can be replaced? It isn't too old but I'm sure it is past its warranty.
Please let me know if you have any "disposable" information.
|
Post Reply
|
Author:
North Carolina Plumber (NC)
Its likely rusted out. Modern disposals are pretty much disposable now, lower quality metals, lower quality motors, etc.
|
Post Reply
|
Author:
bernabeu (SC)
you probably have a 'badger 1 or 5'
upgrade to most $ you can afford ~ you get what you pay for
you want s/s blades and rotor and chamber + 3/4 HP
YOU CAN NOT REPAIR INTERNALLY
==============================================
"Measure Twice & Cut Once" - Retired U.A. Local 1 & 638
|
Post Reply
|
Author:
hj (AZ)
Unless it was a few hundred dollar commercial unit, NO disposer has ever been worth the time and money to repair it, even if you could get the parts.
|
Post Reply
|
Author:
m & m (MD)
When the leak is internal it is usually the pump/motor shaft seal. Time to replace.
|
Post Reply
|
Author:
hj (AZ)
IT makes no difference WHERE the leak is, as long as it is not a rubber connection. In the majority of cases, the economic solution is to replace.
|
Post Reply
|
Please note:
- Inappropriate messages or blatant advertising will be deleted. We cannot be held responsible for bad or inadequate advice.
- Plbg.com has no control over external content that may be linked to from messages posted here. Please follow external links with caution.
- Plbg.com is strictly for the exchange of plumbing related advice and NOT to ask about pricing/costs, nor where to find a product (try Google), nor how to operate or promote a business, nor for ethics (law) and the like questions.
- Plbg.com is also not a place to ask radiant heating (try HeatingHelp.com), electrical or even general construction type questions. We are exclusively for plumbing questions.
Search for plumbing parts on our sponsor's site:
Special thanks to our sponsor:
|